网址ju111十年信誉备用

   Category品类Trade-Mark品种Equivalent to China Standard能比国际标准Characteristics & application形态和应用场景Equivalent to AWS能比AWSHard-surfacing硬面堆焊D 667EDZCr-B-15HRc≥48. Resistance to wear, gas corrosion and oxidation. Hardfacing of blast furnace hopper and cracker part.HRc≥48  ，抗刮、耐气蚀、抗阳极钝化物 。 堆焊鼓风炉料钟、碎裂机设备制造零部件D 802EDCoCr-A-03HRc38-47. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as the edge of thermo-cutter.HRc38-47  ，耐低温、耐蚀、抗刮 。 堆焊气温度部件如热剪截刃口ECoCr-AD 812EDCoCr-B-03HRc45-50. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as internal-combustion engine valve.HRc45-50  ，耐低温、耐蚀、抗刮 。 堆焊气温度部件如四冲程发动机阀ECoCr-BD 822HRc≥53. Resistance to Wear and heat, bad shock resistance. Hardfacing of rotating blade wheel of boiler.HRc≥53  ，耐低温、抗刮  ，但抗碰撞力差 。 堆焊煤气网址ju111十年信誉备用缩放叶子D 832EDCoCr-C-03HRc≥50. Wear and heat resistance. Hardfacing of high temperature part such as hot-rolling guided way.HRc≥50  ，耐低温、抗刮 。 堆焊气温度部件如热扎钢导轨ECoCr-CD 842EDCoCr-D-03HRc28-38. Corrosion and thermo-fatigue resistance, work harding. Hardfacing of hot forging die.HRc28-38  ，耐蚀、抗热困乏  ，具备着整理硬底化性 。 堆焊热锻模Cast iron铸钢Z 308EZNiPure nickel, excellent general properties. Used to weld thin cast iron part and repair welding machined surface, such as guided way of machine tool.纯镍  ，总合稳定性方面好 。 铸钢薄件及整理面补焊用  ，如铣床导卫ENi-ClZ 408EZNiFeIron nickel, high strength and excellent ductility. Repair welding of important gray cast iron and nodular cast iron, such as cylinder cap.镍铁  ，抗拉承载力高、弹蠕变好 。 最重要灰铸钢及球铁焊补用  ，如汽缸筒ENiFe-ClZ 508EZNiCu-1Copper nickel, good machinability and bad crack resistance. Repair welding of sand hole and gray cast iron machined surface subject to no load.镍铜  ，易整理  ，但抗裂性稍差 。 不支撑力的灰铸钢整理面及砂眼补焊ENiCu-BCopper alloys铜各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢Cu 107ECuRed copper, atmosphere and sea water corrosion and excellent electric conductivity. Welding of red copper such as electrical copper row.红铜  ，网址ju111十年信誉备用离层  ，湖水锈蚀  ，导电性好 。 红铜氩弧焊用  ，如导电铜排ECuCu 207ECuSiSilicon bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.硅白铜  ，耐蚀、抗拉承载力高 。 铜、硅白铜及铜聚氯乙烯塑料的聚氯乙烯塑料的碳素钢氩弧焊用ECuSiCu 227ECuSnBTin phosphor bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.锡磷白铜  ，耐蚀、抗拉承载力高 。 铜、硅白铜及铜聚氯乙烯塑料的聚氯乙烯塑料的碳素钢氩弧焊用ECuSn-CCu 237ECuAlAluminum bronze, wear and corrosion and high strength. Welding or surfacing of copper alloys.铝白铜  ，抗刮、耐蚀  ，抗拉承载力高 。 铜各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢氩弧焊或堆焊用ECuAl-A2Aluminum alloys铝各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢Al 109TAlPure aluminum, excellent corrosion resistance and middle strength. Welding of pure aluminum.纯铝  ，耐蚀性好  ，但抗拉承载力不够  ，纯铝氩弧焊用E1100Al 209TAlSiSilicon aluminum, good crack resistance and wide range of usage. Welding of aluminum alloys other than aluminum magnesium alloys.铝硅  ，抗裂性好  ，通用型版性大 。 铝各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢氩弧焊用  ，很难氩弧焊铝镁各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢E4043Al 309TAMnManganese aluminum, corrosion resistance and high strength. Welding of aluminum alloys.铝锰  ，抗拉承载力高  ，耐蚀 。 铝各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢氩弧焊用E3003Nickel alloys镍各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢Ni 102ENi-1Pure nickel. Welding and surfacing of nickel and nickel to steel.纯镍  ，使用镍、镍与钢的氩弧焊与堆焊ENi-1Ni 207ENiCu-7Copper nickel. Welding and surfacing of copper nickel and copper nickel to steel.镍铜  ，使用镍铜、镍铜与钢的氩弧焊与堆焊ENiCu-7Category品类Trademark品种Chemical composition关键有效成分(%)Characteristics & application形态和应用场景Equivalent to AWS能比AWSHardfacing硬面堆焊S 101C3 Cr28 Ni4Si3.5 Fe Rem.HRc48-54. Resistance to wear, gas corrosion and oxidation. Hardfacing of bucket tooth and case pump.HRc48-54  ，抗刮、耐气蚀、抗阳极钝化物 。 堆焊铲斗齿  ，泵套S 111C1 Cr29 W5Co Rem.HRc38-47. Resistance to wear and corrosion at high-temperature. Hardfacing of high temperature and pressure valve.HRc38-47  ，气温度下抗刮、耐蚀 。 堆焊气温度油田低压调节阀ECoCr-AS 112C1.5 Cr29 W8Co Rem.HRc45-50. Resistance to wear and corrosion at high-temperature. Hardfacing of valve and hot-rolling pass.HRc45-50  ，气温度下抗刮、耐蚀 。 堆焊调节阀  ，热扎钢孔型ECoCr-BS 113C2.5 Cr30 W17Co Rem.HRc≥55. Wear and heat resistance at high temperature, bad shock resistance. Hardfacing of screw charging carriage.HRc≥55  ，气温度下抗刮、耐低温  ，但抗碰撞力差 。 堆焊螺旋叶子放卷机用S 114C2.5 Cr30 W12Co Rem.HRc≥53. Wear and heat resistance at high temperature, bad shock resistance. Hardfacing of three-cone bit.HRc≥53  ，气温度下抗刮、耐低温  ，但抗碰撞稍差 。 堆焊牙轮冲击钻头ECoCr-CCopperalloys铜各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢S 201Sn1 Si0.3Mn0.3Cu Rem.Good mechanical properties and crack resistance. Gas welding and argon arc welding of red copper.机设备制造稳定性方面好  ，抗裂性好 。 红铜气焊及氩弧焊用ERCuS 211Si3 Mn1Cu Rem.Good mechanical properties. Argon arc welding of copper alloys and MIG brazing of steel.机设备制造稳定性方面好  ，铜各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢氩弧焊及钢的MIG钎焊用ERCuSi-AlS 212Sn5 Cu Rem.Wear resistance. Argon arc welding of copper alloys and surfacing of steel.抗刮性好 。 铜各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢氩弧焊及钢的堆焊用ERCuSn-AS 213Sn8 Cu Rem.Wear resistance. Argon arc welding of copper alloys and surfacing of steel.抗刮性好 。 铜各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢氩弧焊及钢的堆焊用ERCuSn-CS 214Al7.5 Cu Rem.Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel.抗刮、耐蚀 。 铜各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢氩弧焊及钢的堆焊用ERCuAl-A1S 215Al9 Cu Rem.Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel.抗刮、耐蚀 。 铜各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢氩弧焊及钢的堆焊用ERCuAl-A2S 221Cu60 Sn1 Si0.3Zn Rem.Melting point is about 890℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.融点约890℃ 。 铜聚氯乙烯塑料的聚氯乙烯塑料的碳素钢气焊及碳弧焊用  ，也可钎焊铜、钢、铸钢S 221FCu60 Sn1 Si 0.3Zn Rem.S221 welding rod coated with flux.外涂焊剂的S221电焊条S 222Cu58Sn0.9Si0.1Fe0.8 Zn Rem.Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.融点约880℃ 。 铜聚氯乙烯塑料的聚氯乙烯塑料的碳素钢气焊及碳弧焊用  ，也可钎焊铜、钢、铸钢RBCuZn-CS 222FCu58Sn0.9Si0.1Fe0.8 Zn Rem.S222 welding rod coated with flux.外涂焊剂的S222电焊条RBCuZn-CS 223Cu59 Sn0.6Zn Rem.Melting point is about 900℃. Braze welding of copper, steel and cast iron.融点约900℃ 。 铜、钢、铸钢钎焊用RBCuZn-AS 224Cu62 Si0.5Zn Rem.Melting point is about 905℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.融点约905℃ 。 铜聚氯乙烯塑料的聚氯乙烯塑料的碳素钢气焊及碳弧焊用  ，也可钎焊铜、钢、铸钢Copperalloys铜各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢S 225Cu48 Ni10Zn Rem.Melting point is about 935℃and high strength. Braze welding of steel, nickel and carbide alloys.融点约935℃ 。 高抗拉承载力,钎焊钢、镍及聚氯乙烯塑料的各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢用RBCuZn-DS 225FCu48 Ni10Zn Rem.S225 welding rod coated with flux.外涂焊剂的S225电焊条RBCuZn-DS 226Cu60 Sn0.3Si0.2 Zn Rem.Melting point is about 900℃. Gas welding of brass, also braze welding of copper, steel and cast iron.融点约900℃ 。 铜聚氯乙烯塑料的聚氯乙烯塑料的碳素钢气焊用  ，也可钎焊铜、钢、铸钢S 227Cu58Sn0.9Ni0.5Si0.1 Fe0.8Zn Rem.Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.融点880℃ 。 铜聚氯乙烯塑料的聚氯乙烯塑料的碳素钢气焊及碳弧焊用  ，也可钎焊铜、钢、铸钢RBCuZn-BS 229Cu55 Ni6 Mn4Zn余Melting point is about 920℃, high strength. Braze welding of steel, nickel and hard carbide.融点约920℃ 。 高抗拉承载力,钎焊钢、镍及聚氯乙烯塑料的各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢用Aluminum alloys铝各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢S 301Al≥99.5Good ductility and corrosion resistance. Gas welding and argon arc welding of pure aluminum.弹蠕变好、耐蚀 。 纯铝气焊、氩弧焊用ER1100S 311Si5 Al Rem.Corrosion resistance, wide range of usage. Gas welding and argon arc welding of aluminum alloys other than high magnesium alloys.抗裂性好  ，通用型版性大 。 铝各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢气焊、氩弧焊用 。 很难用高镁各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢ER4043S 321Mn1.3 Al Rem.Good corrosion resistance, weldability and ductility. Gas welding and argon arc welding of aluminum alloys.稳定的耐蚀性、可焊性及弹蠕变 。 铝各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢气焊、氩弧焊用S 331Mg5 Mn0.4Al Rem.Corrosion resistance and high strength. Argon arc welding of aluminum alloys.耐蚀  ，抗拉承载力高 。 铝各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢氩弧焊用ER5183斯米克钎焊料各有：（铜锌钎焊料）  ，（铜磷银基钎焊料）  ，（铝基钎焊料）  ，（锡铅钎焊料）  ，（镍基钎焊料).百科如下所示：Category品类Trade-mark品种Specification規格MeltingPoint融点(℃)Chemicalcomposition关键有效成分(%)Application应用场景Equivalentto AWS能比AWSCopperzinc铜锌L103Wire & rod丝885-888Cu54 Zn Rem.Brazing of copper, bronze and steel, subjected to low load.钎焊铜、白铜和钢等支撑力面积不大部件L104Foil箔890-930Cu57 Mn2Co2 Zn Rem.Brazing of carbide cutting tool.钎焊聚氯乙烯塑料的各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢厨房刀具Copperphosphorus铜磷L201Cast rod, wire & rod, powder铸条、丝、粉710-800P7 Cu Rem.Brazing of copper and copper alloys.钎焊铜及铜各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢BCuP-2L204Cast rod, wire铸条、丝640-815P5 Ag15Cu Rem.Brazing of copper, copper alloys, silver and molybdenum etc.钎焊铜及铜各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢、银、钼等和金材料件 。 BCuP-5L205Cast rod, wire & rod, powder铸条、丝、箔640-800P6 Ag5Cu Rem.Brazing of copper and copper alloys.钎焊铜及铜各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢BCuP-3L207Cast rod, wire & rod铸条、丝640-770P7 Ag5Cu Rem.Brazing of copper and copper alloys.钎焊铜及铜各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢BCuP-7L209Cast rod, wire铸条、丝684-710P7 Ag2Cu Rem.Brazing of copper and copper alloys.钎焊铜及铜各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢 。 BCuP-6　Silverbase银基L302Wire & rod丝745-775Ag25 Cu40Zn Rem.Brazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢、钢及不绣钢管等L303Wire & rod丝660-725Ag45 Cu30Zn余Brazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢、钢及不绣钢管等BAg-5L303FFlux coated rod涂药丝660-725Ag45 Cu30Zn Rem.L303 coated with flux, the same application as L303.外涂钎剂的L303  ，应用场景与L303一样BAg-5L304Foil箔690-775Ag50 Cu34Zn Rem.Brazing of copper, copper alloys and steel etc.钎焊铜及铜各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢、钢等BAg-6L308Wire & rod丝779-780Ag72 Cu Rem.Brazing of copper and nickel under vacuum or reducing protective atmosphere.铜和镍的真空系统箱或复原保障网址ju111十年信誉备用钎焊BAg-8L312Wire & rod丝595-605Ag40.Cu.Zn.CdBrazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢、钢及不绣钢管等L313Wire & rod丝625-635Ag50.Cu.Zn.CdBrazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢、钢及不绣钢管等BAg-1aL321Wire & rod丝615-650Ag56.Cu.Zn.SnBrazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢、钢及不绣钢管等BAg-7L323Wire & rod丝665-755Ag30.Cu.Zn.SnBrazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢、钢及不绣钢管等L325Wire & rod丝645-685Ag45.Cu.Zn.SnBrazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢、钢及不绣钢管等BAg-36L326Wire & rod丝650-720Ag38.Cu.Zn.SnBrazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢、钢及不绣钢管等BAg-34Aluminum base铝基L400Cast rod, wire & rod铸条、丝577-582Si11.5Al Rem.Brazing of aluminum and aluminum alloys.铝及铝各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢的钎焊BAlSi-4L401Cast rod铸条525-535Si5 Cu28Al Rem.Brazing of aluminum and aluminum alloys.铝及铝各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢的钎焊Tin lead锡铅L600Wire & rod丝183-185Sn60 Sb≤0.8Pb Rem.Soldering of fusible metals and heat-treated part.易熔和金材料件及热整理件的钎焊60SnL601Wire & rod丝183-227Sn18 Sb2Pb Rem.Soldering of copper, copper alloys and galvanized iron plain sheet.铜及铜各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢、热浸热渡白铁的钎焊 。 18SnL602Wire & rod丝183-256Sn30 Sb2Pb Rem.Soldering of copper, brass, copper alloys and galvanized iron plain sheet.铜、铜聚氯乙烯塑料的聚氯乙烯塑料的碳素钢、铁、热浸热渡白铁的钎焊30SnL603Wire & rod丝183-235Sn40 Sb2Pb Rem.Soldering of copper, copper alloys, steel and zinc parts.铜及铜各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢、钢、锌制要求要的零部件的钎焊40SnL604Wire & rod丝183-222Sn90 Sb≤0.15Pb Rem.Soldering of copper and steel for food and medicine field.美食、医疗保健要求铜、钢等和金材料件的钎焊90SnL605Wire & rod丝232-240Ag5 Sn95Soldering of copper and steel for electrical and food field.电嚣、美食要求铜、钢等和金材料件的钎焊L608Wire & rod丝295-305Sn5.5 Ag2.5Pb Rem.Soldering of copper, copper alloys, steel and stainless steel.铜及铜各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢、钢及不绣钢管的钎焊Nickel base镍基L702Powder粉970-1000Cr7 B3 Si4Ni Rem.Brazing of stainless steel under vacuum or protective atmosphere.不绣钢管真空系统箱或保障网址ju111十年信誉备用钎焊BNi-2Category品类Trade-mark品种Product name品牌Characteristics & application形态和应用场景Gaswelding气焊CJ301Copper gas welding flux铜气焊熔剂Melting point is about 650℃, flux for gas welding and brazing of copper and copper alloys.融点约650℃  ，铜及铜各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢气焊或钎焊的助熔剂CJ401Aluminum gas welding flux铝气焊熔剂Melting point is about 560℃, flux for gas welding of aluminum and aluminum alloys.融点约560℃  ，铝及铝各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢气焊的助熔剂Silverbrazing银钎焊QJ101Silver brazing flux银钎焊熔剂Brazing flux of copper, copper alloys, steel and stainless steel within 550-750℃.在550-750℃区域钎焊铜及铜各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢、钢及不绣钢管的助熔剂QJ102Silver brazing flux银钎焊熔剂Brazing flux of copper, copper alloys, steel and stainless steel within 600-850℃.在600-850℃区域钎焊铜及铜各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢、钢及不绣钢管的助熔剂QJ102ASilver brazing flux银钎焊熔剂Brazing flux of copper, copper alloys, steel and stainless steel within 600-850℃. Non agglomeration.在600-850℃区域钎焊铜及铜各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢、钢及不绣钢管 。 很难凝固QJ112Silver brazing paste flux膏状银钎焊熔剂Brazing flux of copper, copper alloys, steel and stainless steel within 600-850℃.在600-850℃区域钎焊铜及铜各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢、钢及不绣钢管的助熔剂QJ103Silver brazing flux银钎焊熔剂Brazing flux of copper, copper alloys, steel and stainless steel within 550-750℃.在550-750℃区域钎焊铜及铜各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢、钢及不绣钢管的助熔剂Aluminum brazing铝钎焊QJ201Aluminum brazing flux铝钎焊熔剂Brazing flux of aluminum and aluminum alloys within 450-620℃.在450-620℃区域钎焊铝及铝各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢的助熔剂QJ207Aluminum brazing flux铝钎焊熔剂Brazing flux of aluminum and aluminum alloys within 560-620℃.在560-620℃区域钎焊铝及铝各种聚氯乙烯塑料的聚氯乙烯塑料的碳素钢的助熔剂Category品类Trade-mark品种Chemicalcomposition化学工业有效成分(%)Hardness洛氏硬度Application应用场景　Oxy-AcetyleneFlamespray-using氧乙炔焰喷焊F103Cr10 B1.5 Si3 Ni Rem.HRc 25Spray-fusing of cast iron parts,,, such as die for glass, cylinder, and guide.铸钢件的喷焊  ，如玻离模头设备  ，汽缸、导轨F101Cr10 B2.5 Si3 Ni Rem.HRc 45Spray-fusing of parts resistance to wear and corrosion, such as valve, the rotator and piston of pump.抗刮、耐蚀件的喷焊  ，如调节阀、泵电机定转子、泵注塞泵F101FeCr10 B2.5 Si3 Fe10Ni Rem.HRc 45Spray-fusing of corrosion-resistant parts, such as axle and stigma.抗刮件的喷焊  ，如轴类、汽门F102Cr16 B4 Si4 Ni Rem.HRc 60Spray-fusing of parts resistance to wear, corrosion and high temperature oxidation, such as die and piston.抗刮、耐蚀、抗气温度阳极钝化物部件的喷焊  ，如模头设备、注塞泵F102FeCr16 B4 Si4 Fe15Ni Rem.HRc 60Spray-fusing of corrosion-resistant parts, such as axle and cold die.抗刮件的喷焊  ，如轴类、冷模头设备F105F102+50%WCHRc 60Spray-fusing of parts resistance to grain-wear , such as guide plate, scraper and blade of fan.抗金刚石微粉偏磨场所  ，的喷焊  ，如导板、滾筒、压缩机叶子F105FeF102Fe+35%WCHRc 60Spray-fusing of parts resistance to grain-wear, such as guide plate, scraper and blade of fan.抗金刚石微粉偏磨场所  ，的喷焊  ，如导板、滾筒、压缩机叶子F108F102+80%WCHRc 60Spray-fusing of parts resistance to strong grain-wear and free machining, such as harrow teeth of dredger.抗浓烈金刚石微粉偏磨  ，不能自己整理场所  ，的喷焊  ，如挖泥船耙齿F301Cr5 B4 Si4 Ni30Fe Rem.HRc 45Spray-fusing of vulnerable parts of agricultural machinery and mining machinery, such as gear and axletree.农机具,矿区机设备制造易损件的喷焊  ，如齿轴  ，车轴Track iron powder轨铁粉Cr5 B1.5 Si3 Ni30Fe Rem.HRc 28Repair spray-fusing of defects such as scratch and concavity of railroad track.铁路运输道轨刮伤、低塌等问题的清理喷焊Oxy-acetylene flame spraying氧乙炔焰喷漆料工艺F111Cr5 B1.5 Si3 Ni30Fe Rem.HB 150Spraying of bearing and cutting parts etc.滚柱滚针滚动轴承、切割件等的喷漆料工艺F113Cr10 B1.5 Si3 Ni Rem.HB 250Spray-fusing or spraying, such as roll, piston and axle of wear and corrosion resistance.喷漆料工艺也能够喷焊  ，如滾筒、注塞泵、耐蚀抗刮轴等F313Cr15 B1.5 Fe Rem.HB 250Spraying of dryer of papermaking and axle.造纸技术烘缸、轴类的喷漆料工艺F314Cr18 Ni9 B1.5 Fe Rem.HB 250Spraying of axle.轴类喷漆料工艺F412Sn10 P0.3 Cu Rem.HB 80Spraying of axle and bearing.轴、滚柱滚针滚动轴承的喷漆料工艺F512塑料Al5Ni95Backing spray of transition layer between base and working layer.喷漆料工艺层的基体与运行层直接过渡期（底妆）层用喷漆料工艺PTAhardfacing等正阴阳铝阴阳阴离子弧喷焊F221Cr26 W5 B0.7 Co Rem.HRc 43PTA hardfacing of sealing surface of high temperature and high pressure valve and the edge of hot shearing tool.气温度油田低压调节阀封口面、热剪截刃口的等正阴阳铝阴阳阴离子喷焊F223Cr21 W5 B1.5 Co Rem.HRc 40PTA hardfacing of parts resistance to wear and corrosion at high temperature, such as valve under high temperature and high pressure, and blower.气温度下抗刮耐蚀件的喷焊  ，如气温度油田低压调节阀、鼓压缩机F321Cr13 B1.5 Si1 Fe Rem.HRc 45PTA hardfacing of corrosion-resistant parts under mid-temperature and mid-pressure, such as stop-plate etc.中温中压调节阀的闸板下列关于他抗刮件的等正阴阳铝阴阳阴离子喷焊F322Cr23 Ni13 Si5 B1Fe Rem.HRc 40PTA hardfacing of corrosion-resistant parts under mid-temperature and mid-pressure, such as valve base etc.中温中压调节阀的阀门法兰下列关于他抗刮件的等正阴阳铝阴阳阴离子喷焊F422Sn10 P0.3 Cu Rem.HB 80PTA hardfacing of axle and bearing etc.轴、滚柱滚针滚动轴承等正阴阳铝阴阳阴离子喷焊