网址ju111十年信誉备用

   Category类属Trade-Mark钢号Equivalent to China Standard相等于行业标准Characteristics & application性状和使用使用Equivalent to AWS相等于AWSHard-surfacing硬面堆焊D 667EDZCr-B-15HRc≥48. Resistance to wear, gas corrosion and oxidation. Hardfacing of blast furnace hopper and cracker part.HRc≥48  ，耐腐蚀性性、耐气蚀、抗防硫化反应 。 堆焊鼓风炉料钟、支离破碎零部件D 802EDCoCr-A-03HRc38-47. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as the edge of thermo-cutter.HRc38-47  ，耐熱性性、耐蚀、耐腐蚀性性 。 堆焊较耐常温度类件如热裁切刀身ECoCr-AD 812EDCoCr-B-03HRc45-50. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as internal-combustion engine valve.HRc45-50  ，耐熱性性、耐蚀、耐腐蚀性性 。 堆焊较耐常温度类件如内然机阀ECoCr-BD 822HRc≥53. Resistance to Wear and heat, bad shock resistance. Hardfacing of rotating blade wheel of boiler.HRc≥53  ，耐熱性性、耐腐蚀性性  ，但抗影响力差 。 堆焊煤气网址ju111十年信誉备用电动机扇叶D 832EDCoCr-C-03HRc≥50. Wear and heat resistance. Hardfacing of high temperature part such as hot-rolling guided way.HRc≥50  ，耐熱性性、耐腐蚀性性 。 堆焊较耐常温度类件如轧钢导轨ECoCr-CD 842EDCoCr-D-03HRc28-38. Corrosion and thermo-fatigue resistance, work harding. Hardfacing of hot forging die.HRc28-38  ，耐蚀、抗热身体疲劳  ，存在运作强度性 。 堆焊热锻模Cast iron装饰管Z 308EZNiPure nickel, excellent general properties. Used to weld thin cast iron part and repair welding machined surface, such as guided way of machine tool.纯镍  ，总合耐炎热网址ju111十年信誉备用性好 。 装饰管薄件及运作面补焊用  ，如机床主轴导卫ENi-ClZ 408EZNiFeIron nickel, high strength and excellent ductility. Repair welding of important gray cast iron and nodular cast iron, such as cylinder cap.镍铁  ，抗弯屈服难度高、蠕变好 。 重要性灰装饰管及球铁焊补用  ，如汽气缸盖ENiFe-ClZ 508EZNiCu-1Copper nickel, good machinability and bad crack resistance. Repair welding of sand hole and gray cast iron machined surface subject to no load.镍铜  ，易运作  ，但抗裂性太差 。 不受压力的灰装饰管运作面及砂眼补焊ENiCu-BCopper alloys铜耐炎热网址ju111十年信誉备用锰钢Cu 107ECuRed copper, atmosphere and sea water corrosion and excellent electric conductivity. Welding of red copper such as electrical copper row.裸无氧裸铜  ，耐霸气  ，海面腐蚀性  ，导电性好 。 裸无氧裸铜焊结用  ，如导电铜排ECuCu 207ECuSiSilicon bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.硅尊盘  ，耐蚀、抗弯屈服难度高 。 铜、硅尊盘及红铜焊结用ECuSiCu 227ECuSnBTin phosphor bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.锡磷尊盘  ，耐蚀、抗弯屈服难度高 。 铜、硅尊盘及红铜焊结用ECuSn-CCu 237ECuAlAluminum bronze, wear and corrosion and high strength. Welding or surfacing of copper alloys.铝尊盘  ，耐腐蚀性性、耐蚀  ，抗弯屈服难度高 。 铜耐炎热网址ju111十年信誉备用锰钢焊结或堆焊用ECuAl-A2Aluminum alloys铝耐炎热网址ju111十年信誉备用锰钢Al 109TAlPure aluminum, excellent corrosion resistance and middle strength. Welding of pure aluminum.纯铝  ，耐蚀性好  ，但抗弯屈服难度不太高  ，纯铝焊结用E1100Al 209TAlSiSilicon aluminum, good crack resistance and wide range of usage. Welding of aluminum alloys other than aluminum magnesium alloys.铝硅  ，抗裂性好  ，互通性大 。 铝耐炎热网址ju111十年信誉备用锰钢焊结用  ，不应焊结铝镁耐炎热网址ju111十年信誉备用锰钢E4043Al 309TAMnManganese aluminum, corrosion resistance and high strength. Welding of aluminum alloys.铝锰  ，抗弯屈服难度高  ，耐蚀 。 铝耐炎热网址ju111十年信誉备用锰钢焊结用E3003Nickel alloys镍耐炎热网址ju111十年信誉备用锰钢Ni 102ENi-1Pure nickel. Welding and surfacing of nickel and nickel to steel.纯镍  ，应代替镍、镍与钢的焊结与堆焊ENi-1Ni 207ENiCu-7Copper nickel. Welding and surfacing of copper nickel and copper nickel to steel.镍铜  ，应代替镍铜、镍铜与钢的焊结与堆焊ENiCu-7Category类属Trademark钢号Chemical composition通常化学反应成分的材料(%)Characteristics & application性状和使用使用Equivalent to AWS相等于AWSHardfacing硬面堆焊S 101C3 Cr28 Ni4Si3.5 Fe Rem.HRc48-54. Resistance to wear, gas corrosion and oxidation. Hardfacing of bucket tooth and case pump.HRc48-54  ，耐腐蚀性性、耐气蚀、抗防硫化反应 。 堆焊铲斗齿  ，泵套S 111C1 Cr29 W5Co Rem.HRc38-47. Resistance to wear and corrosion at high-temperature. Hardfacing of high temperature and pressure valve.HRc38-47  ，较耐常温度下耐腐蚀性性、耐蚀 。 堆焊较耐常温度高电压铜阀ECoCr-AS 112C1.5 Cr29 W8Co Rem.HRc45-50. Resistance to wear and corrosion at high-temperature. Hardfacing of valve and hot-rolling pass.HRc45-50  ，较耐常温度下耐腐蚀性性、耐蚀 。 堆焊铜阀  ，轧钢孔型ECoCr-BS 113C2.5 Cr30 W17Co Rem.HRc≥55. Wear and heat resistance at high temperature, bad shock resistance. Hardfacing of screw charging carriage.HRc≥55  ，较耐常温度下耐腐蚀性性、耐熱性性  ，但抗影响力差 。 堆焊螺旋树叶放卷机用S 114C2.5 Cr30 W12Co Rem.HRc≥53. Wear and heat resistance at high temperature, bad shock resistance. Hardfacing of three-cone bit.HRc≥53  ，较耐常温度下耐腐蚀性性、耐熱性性  ，但抗影响太差 。 堆焊牙轮冲击钻头ECoCr-CCopperalloys铜耐炎热网址ju111十年信誉备用锰钢S 201Sn1 Si0.3Mn0.3Cu Rem.Good mechanical properties and crack resistance. Gas welding and argon arc welding of red copper.设备耐炎热网址ju111十年信誉备用性好  ，抗裂性好 。 裸无氧裸铜气焊及氩弧焊用ERCuS 211Si3 Mn1Cu Rem.Good mechanical properties. Argon arc welding of copper alloys and MIG brazing of steel.设备耐炎热网址ju111十年信誉备用性好  ，铜耐炎热网址ju111十年信誉备用锰钢氩弧焊及钢的MIG钎焊用ERCuSi-AlS 212Sn5 Cu Rem.Wear resistance. Argon arc welding of copper alloys and surfacing of steel.耐腐蚀性性性好 。 铜耐炎热网址ju111十年信誉备用锰钢氩弧焊及钢的堆焊用ERCuSn-AS 213Sn8 Cu Rem.Wear resistance. Argon arc welding of copper alloys and surfacing of steel.耐腐蚀性性性好 。 铜耐炎热网址ju111十年信誉备用锰钢氩弧焊及钢的堆焊用ERCuSn-CS 214Al7.5 Cu Rem.Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel.耐腐蚀性性、耐蚀 。 铜耐炎热网址ju111十年信誉备用锰钢氩弧焊及钢的堆焊用ERCuAl-A1S 215Al9 Cu Rem.Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel.耐腐蚀性性、耐蚀 。 铜耐炎热网址ju111十年信誉备用锰钢氩弧焊及钢的堆焊用ERCuAl-A2S 221Cu60 Sn1 Si0.3Zn Rem.Melting point is about 890℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.融点约890℃ 。 红铜气焊及碳弧焊用  ，也可钎焊铜、钢、装饰管S 221FCu60 Sn1 Si 0.3Zn Rem.S221 welding rod coated with flux.外涂焊剂的S221铜铜电焊条S 222Cu58Sn0.9Si0.1Fe0.8 Zn Rem.Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.融点约880℃ 。 红铜气焊及碳弧焊用  ，也可钎焊铜、钢、装饰管RBCuZn-CS 222FCu58Sn0.9Si0.1Fe0.8 Zn Rem.S222 welding rod coated with flux.外涂焊剂的S222铜铜电焊条RBCuZn-CS 223Cu59 Sn0.6Zn Rem.Melting point is about 900℃. Braze welding of copper, steel and cast iron.融点约900℃ 。 铜、钢、装饰管钎焊用RBCuZn-AS 224Cu62 Si0.5Zn Rem.Melting point is about 905℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.融点约905℃ 。 红铜气焊及碳弧焊用  ，也可钎焊铜、钢、装饰管Copperalloys铜耐炎热网址ju111十年信誉备用锰钢S 225Cu48 Ni10Zn Rem.Melting point is about 935℃and high strength. Braze welding of steel, nickel and carbide alloys.融点约935℃ 。 高抗弯屈服难度,钎焊钢、镍及硬塑的耐炎热网址ju111十年信誉备用锰钢用RBCuZn-DS 225FCu48 Ni10Zn Rem.S225 welding rod coated with flux.外涂焊剂的S225铜铜电焊条RBCuZn-DS 226Cu60 Sn0.3Si0.2 Zn Rem.Melting point is about 900℃. Gas welding of brass, also braze welding of copper, steel and cast iron.融点约900℃ 。 红铜气焊用  ，也可钎焊铜、钢、装饰管S 227Cu58Sn0.9Ni0.5Si0.1 Fe0.8Zn Rem.Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.融点880℃ 。 红铜气焊及碳弧焊用  ，也可钎焊铜、钢、装饰管RBCuZn-BS 229Cu55 Ni6 Mn4Zn余Melting point is about 920℃, high strength. Braze welding of steel, nickel and hard carbide.融点约920℃ 。 高抗弯屈服难度,钎焊钢、镍及硬塑的耐炎热网址ju111十年信誉备用锰钢用Aluminum alloys铝耐炎热网址ju111十年信誉备用锰钢S 301Al≥99.5Good ductility and corrosion resistance. Gas welding and argon arc welding of pure aluminum.蠕变好、耐蚀 。 纯铝气焊、氩弧焊用ER1100S 311Si5 Al Rem.Corrosion resistance, wide range of usage. Gas welding and argon arc welding of aluminum alloys other than high magnesium alloys.抗裂性好  ，互通性大 。 铝耐炎热网址ju111十年信誉备用锰钢气焊、氩弧焊用 。 不应用高镁耐炎热网址ju111十年信誉备用锰钢ER4043S 321Mn1.3 Al Rem.Good corrosion resistance, weldability and ductility. Gas welding and argon arc welding of aluminum alloys.更好的耐蚀性、可焊性及蠕变 。 铝耐炎热网址ju111十年信誉备用锰钢气焊、氩弧焊用S 331Mg5 Mn0.4Al Rem.Corrosion resistance and high strength. Argon arc welding of aluminum alloys.耐蚀  ，抗弯屈服难度高 。 铝耐炎热网址ju111十年信誉备用锰钢氩弧焊用ER5183斯米克钎焊料各有：（铜锌钎焊料）  ，（铜磷银基钎焊料）  ，（铝基钎焊料）  ，（锡铅钎焊料）  ，（镍基钎焊料).百度百科下面：Category类属Trade-mark钢号Specification尺寸规格MeltingPoint融点(℃)Chemicalcomposition通常化学反应成分的材料(%)Application使用使用Equivalentto AWS相等于AWSCopperzinc铜锌L103Wire & rod丝885-888Cu54 Zn Rem.Brazing of copper, bronze and steel, subjected to low load.钎焊铜、尊盘和钢等受压力不高类件L104Foil箔890-930Cu57 Mn2Co2 Zn Rem.Brazing of carbide cutting tool.钎焊硬塑的耐炎热网址ju111十年信誉备用锰钢钨钢刀Copperphosphorus铜磷L201Cast rod, wire & rod, powder铸条、丝、粉710-800P7 Cu Rem.Brazing of copper and copper alloys.钎焊铜及铜耐炎热网址ju111十年信誉备用锰钢BCuP-2L204Cast rod, wire铸条、丝640-815P5 Ag15Cu Rem.Brazing of copper, copper alloys, silver and molybdenum etc.钎焊铜及铜耐炎热网址ju111十年信誉备用锰钢、银、钼等硬质轻铝耐热碳素钢材料 。 BCuP-5L205Cast rod, wire & rod, powder铸条、丝、箔640-800P6 Ag5Cu Rem.Brazing of copper and copper alloys.钎焊铜及铜耐炎热网址ju111十年信誉备用锰钢BCuP-3L207Cast rod, wire & rod铸条、丝640-770P7 Ag5Cu Rem.Brazing of copper and copper alloys.钎焊铜及铜耐炎热网址ju111十年信誉备用锰钢BCuP-7L209Cast rod, wire铸条、丝684-710P7 Ag2Cu Rem.Brazing of copper and copper alloys.钎焊铜及铜耐炎热网址ju111十年信誉备用锰钢 。 BCuP-6　Silverbase银基L302Wire & rod丝745-775Ag25 Cu40Zn Rem.Brazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜耐炎热网址ju111十年信誉备用锰钢、钢及装饰管等L303Wire & rod丝660-725Ag45 Cu30Zn余Brazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜耐炎热网址ju111十年信誉备用锰钢、钢及装饰管等BAg-5L303FFlux coated rod涂药丝660-725Ag45 Cu30Zn Rem.L303 coated with flux, the same application as L303.外涂钎剂的L303  ，使用使用与L303同一BAg-5L304Foil箔690-775Ag50 Cu34Zn Rem.Brazing of copper, copper alloys and steel etc.钎焊铜及铜耐炎热网址ju111十年信誉备用锰钢、钢等BAg-6L308Wire & rod丝779-780Ag72 Cu Rem.Brazing of copper and nickel under vacuum or reducing protective atmosphere.铜和镍的真空室系统或重置维护暖场钎焊BAg-8L312Wire & rod丝595-605Ag40.Cu.Zn.CdBrazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜耐炎热网址ju111十年信誉备用锰钢、钢及装饰管等L313Wire & rod丝625-635Ag50.Cu.Zn.CdBrazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜耐炎热网址ju111十年信誉备用锰钢、钢及装饰管等BAg-1aL321Wire & rod丝615-650Ag56.Cu.Zn.SnBrazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜耐炎热网址ju111十年信誉备用锰钢、钢及装饰管等BAg-7L323Wire & rod丝665-755Ag30.Cu.Zn.SnBrazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜耐炎热网址ju111十年信誉备用锰钢、钢及装饰管等L325Wire & rod丝645-685Ag45.Cu.Zn.SnBrazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜耐炎热网址ju111十年信誉备用锰钢、钢及装饰管等BAg-36L326Wire & rod丝650-720Ag38.Cu.Zn.SnBrazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜耐炎热网址ju111十年信誉备用锰钢、钢及装饰管等BAg-34Aluminum base铝基L400Cast rod, wire & rod铸条、丝577-582Si11.5Al Rem.Brazing of aluminum and aluminum alloys.铝及铝耐炎热网址ju111十年信誉备用锰钢的钎焊BAlSi-4L401Cast rod铸条525-535Si5 Cu28Al Rem.Brazing of aluminum and aluminum alloys.铝及铝耐炎热网址ju111十年信誉备用锰钢的钎焊Tin lead锡铅L600Wire & rod丝183-185Sn60 Sb≤0.8Pb Rem.Soldering of fusible metals and heat-treated part.易熔硬质轻铝耐热碳素钢材料及热运作件的钎焊60SnL601Wire & rod丝183-227Sn18 Sb2Pb Rem.Soldering of copper, copper alloys and galvanized iron plain sheet.铜及铜耐炎热网址ju111十年信誉备用锰钢、电镀锌钢管白铁的钎焊 。 18SnL602Wire & rod丝183-256Sn30 Sb2Pb Rem.Soldering of copper, brass, copper alloys and galvanized iron plain sheet.铜、红铜、铁、电镀锌钢管白铁的钎焊30SnL603Wire & rod丝183-235Sn40 Sb2Pb Rem.Soldering of copper, copper alloys, steel and zinc parts.铜及铜耐炎热网址ju111十年信誉备用锰钢、钢、锌制零件及运转情况的钎焊40SnL604Wire & rod丝183-222Sn90 Sb≤0.15Pb Rem.Soldering of copper and steel for food and medicine field.饮食、医疗管理营养铜、钢等硬质轻铝耐热碳素钢材料的钎焊90SnL605Wire & rod丝232-240Ag5 Sn95Soldering of copper and steel for electrical and food field.电子产品、饮食营养铜、钢等硬质轻铝耐热碳素钢材料的钎焊L608Wire & rod丝295-305Sn5.5 Ag2.5Pb Rem.Soldering of copper, copper alloys, steel and stainless steel.铜及铜耐炎热网址ju111十年信誉备用锰钢、钢及装饰管的钎焊Nickel base镍基L702Powder粉970-1000Cr7 B3 Si4Ni Rem.Brazing of stainless steel under vacuum or protective atmosphere.装饰管真空室系统或维护暖场钎焊BNi-2Category类属Trade-mark钢号Product name简称Characteristics & application性状和使用使用Gaswelding气焊CJ301Copper gas welding flux铜气焊熔剂Melting point is about 650℃, flux for gas welding and brazing of copper and copper alloys.融点约650℃  ，铜及铜耐炎热网址ju111十年信誉备用锰钢气焊或钎焊的助熔剂CJ401Aluminum gas welding flux铝气焊熔剂Melting point is about 560℃, flux for gas welding of aluminum and aluminum alloys.融点约560℃  ，铝及铝耐炎热网址ju111十年信誉备用锰钢气焊的助熔剂Silverbrazing银钎焊QJ101Silver brazing flux银钎焊熔剂Brazing flux of copper, copper alloys, steel and stainless steel within 550-750℃.在550-750℃时间的区间之内钎焊铜及铜耐炎热网址ju111十年信誉备用锰钢、钢及装饰管的助熔剂QJ102Silver brazing flux银钎焊熔剂Brazing flux of copper, copper alloys, steel and stainless steel within 600-850℃.在600-850℃时间的区间之内钎焊铜及铜耐炎热网址ju111十年信誉备用锰钢、钢及装饰管的助熔剂QJ102ASilver brazing flux银钎焊熔剂Brazing flux of copper, copper alloys, steel and stainless steel within 600-850℃. Non agglomeration.在600-850℃时间的区间之内钎焊铜及铜耐炎热网址ju111十年信誉备用锰钢、钢及装饰管 。 不方便结团QJ112Silver brazing paste flux膏状银钎焊熔剂Brazing flux of copper, copper alloys, steel and stainless steel within 600-850℃.在600-850℃时间的区间之内钎焊铜及铜耐炎热网址ju111十年信誉备用锰钢、钢及装饰管的助熔剂QJ103Silver brazing flux银钎焊熔剂Brazing flux of copper, copper alloys, steel and stainless steel within 550-750℃.在550-750℃时间的区间之内钎焊铜及铜耐炎热网址ju111十年信誉备用锰钢、钢及装饰管的助熔剂Aluminum brazing铝钎焊QJ201Aluminum brazing flux铝钎焊熔剂Brazing flux of aluminum and aluminum alloys within 450-620℃.在450-620℃时间的区间之内钎焊铝及铝耐炎热网址ju111十年信誉备用锰钢的助熔剂QJ207Aluminum brazing flux铝钎焊熔剂Brazing flux of aluminum and aluminum alloys within 560-620℃.在560-620℃时间的区间之内钎焊铝及铝耐炎热网址ju111十年信誉备用锰钢的助熔剂Category类属Trade-mark钢号Chemicalcomposition化学反应化学反应成分的材料(%)Hardness强度Application使用使用　Oxy-AcetyleneFlamespray-using氧乙炔焰喷焊F103Cr10 B1.5 Si3 Ni Rem.HRc 25Spray-fusing of cast iron parts,,, such as die for glass, cylinder, and guide.装饰管件的喷焊  ，如有机玻璃模貝设备  ，汽缸、导轨F101Cr10 B2.5 Si3 Ni Rem.HRc 45Spray-fusing of parts resistance to wear and corrosion, such as valve, the rotator and piston of pump.耐腐蚀性性、耐蚀件的喷焊  ，如铜阀、泵叶轮、泵注塞泵F101FeCr10 B2.5 Si3 Fe10Ni Rem.HRc 45Spray-fusing of corrosion-resistant parts, such as axle and stigma.耐腐蚀性性件的喷焊  ，如轴类、汽门F102Cr16 B4 Si4 Ni Rem.HRc 60Spray-fusing of parts resistance to wear, corrosion and high temperature oxidation, such as die and piston.耐腐蚀性性、耐蚀、抗较耐常温度防硫化反应类件的喷焊  ，如模貝设备、注塞泵F102FeCr16 B4 Si4 Fe15Ni Rem.HRc 60Spray-fusing of corrosion-resistant parts, such as axle and cold die.耐腐蚀性性件的喷焊  ，如轴类、冷模貝设备F105F102+50%WCHRc 60Spray-fusing of parts resistance to grain-wear , such as guide plate, scraper and blade of fan.抗磨料粒度轮胎偏磨施工地点的喷焊  ，如导板、刮刀、送轴流式生产的风机树叶F105FeF102Fe+35%WCHRc 60Spray-fusing of parts resistance to grain-wear, such as guide plate, scraper and blade of fan.抗磨料粒度轮胎偏磨施工地点的喷焊  ，如导板、刮刀、送轴流式生产的风机树叶F108F102+80%WCHRc 60Spray-fusing of parts resistance to strong grain-wear and free machining, such as harrow teeth of dredger.抗明显磨料粒度轮胎偏磨  ，暂时无法运作施工地点的喷焊  ，如挖泥船耙齿F301Cr5 B4 Si4 Ni30Fe Rem.HRc 45Spray-fusing of vulnerable parts of agricultural machinery and mining machinery, such as gear and axletree.农业机械装备设备,煤矿设备易损件的喷焊  ，如齿轴  ，车轴Track iron powder轨铁粉Cr5 B1.5 Si3 Ni30Fe Rem.HRc 28Repair spray-fusing of defects such as scratch and concavity of railroad track.铁路局道轨扭伤、低塌等通病的修复工具喷焊Oxy-acetylene flame spraying氧乙炔焰静电静电喷塑工艺工艺F111Cr5 B1.5 Si3 Ni30Fe Rem.HB 150Spraying of bearing and cutting parts etc.轴套、切屑件等的静电静电喷塑工艺工艺F113Cr10 B1.5 Si3 Ni Rem.HB 250Spray-fusing or spraying, such as roll, piston and axle of wear and corrosion resistance.静电静电喷塑工艺工艺可以喷焊  ，如辊筒、注塞泵、耐蚀耐腐蚀性性轴等F313Cr15 B1.5 Fe Rem.HB 250Spraying of dryer of papermaking and axle.造纸工业烘缸、轴类的静电静电喷塑工艺工艺F314Cr18 Ni9 B1.5 Fe Rem.HB 250Spraying of axle.轴类静电静电喷塑工艺工艺F412Sn10 P0.3 Cu Rem.HB 80Spraying of axle and bearing.轴、轴套的静电静电喷塑工艺工艺F512塑料Al5Ni95Backing spray of transition layer between base and working layer.静电静电喷塑工艺工艺层的基体与运作层两者之间缓冲间（打底妆）层用静电静电喷塑工艺工艺PTAhardfacing等亚铁阳铝阴铁离子弧喷焊F221Cr26 W5 B0.7 Co Rem.HRc 43PTA hardfacing of sealing surface of high temperature and high pressure valve and the edge of hot shearing tool.较耐常温度高电压铜阀封严面、热裁切刃口的等亚铁阳铝阴铁离子喷焊F223Cr21 W5 B1.5 Co Rem.HRc 40PTA hardfacing of parts resistance to wear and corrosion at high temperature, such as valve under high temperature and high pressure, and blower.较耐常温度下耐腐蚀性性耐蚀件的喷焊  ，如较耐常温度高电压铜阀、鼓送轴流式生产的风机F321Cr13 B1.5 Si1 Fe Rem.HRc 45PTA hardfacing of corrosion-resistant parts under mid-temperature and mid-pressure, such as stop-plate etc.中温中压铜阀的闸板及他耐腐蚀性性件的等亚铁阳铝阴铁离子喷焊F322Cr23 Ni13 Si5 B1Fe Rem.HRc 40PTA hardfacing of corrosion-resistant parts under mid-temperature and mid-pressure, such as valve base etc.中温中压铜阀的高压闸阀及他耐腐蚀性性件的等亚铁阳铝阴铁离子喷焊F422Sn10 P0.3 Cu Rem.HB 80PTA hardfacing of axle and bearing etc.轴、轴套等亚铁阳铝阴铁离子喷焊